/testing/guestbin/swan-prep ]0;root@swantest:/home/build/libreswan/testing/pluto/ikev1-03-fuzzer[root@east ikev1-03-fuzzer]# ipsec _stackmanager start ]0;root@swantest:/home/build/libreswan/testing/pluto/ikev1-03-fuzzer[root@east ikev1-03-fuzzer]# # Start only one, so it is easier to spot a crash ]0;root@swantest:/home/build/libreswan/testing/pluto/ikev1-03-fuzzer[root@east ikev1-03-fuzzer]# ipsec pluto --config /etc/ipsec.conf ]0;root@swantest:/home/build/libreswan/testing/pluto/ikev1-03-fuzzer[root@east ikev1-03-fuzzer]# /testing/pluto/bin/wait-until-pluto-started ]0;root@swantest:/home/build/libreswan/testing/pluto/ikev1-03-fuzzer[root@east ikev1-03-fuzzer]# ipsec auto --add test 002 added IKEv1 connection "test" ]0;root@swantest:/home/build/libreswan/testing/pluto/ikev1-03-fuzzer[root@east ikev1-03-fuzzer]# echo "initdone" initdone ]0;root@swantest:/home/build/libreswan/testing/pluto/ikev1-03-fuzzer[root@east ikev1-03-fuzzer]# # if east was already down, we crashed it ]0;root@swantest:/home/build/libreswan/testing/pluto/ikev1-03-fuzzer[root@east ikev1-03-fuzzer]# hostname |grep east > /dev/null && ipsec whack --shutdown 002 shutting down ]0;root@swantest:/home/build/libreswan/testing/pluto/ikev1-03-fuzzer[root@east ikev1-03-fuzzer]# hostname |grep east > /dev/null && grep "packet from" /tmp/pluto.log | sed "s/^.*packet from//" 192.1.2.45:59276: message ignored because it contains a payload type (ISAKMP_NEXT_SA) unexpected by state STATE_INFO 192.1.2.45:59276: sending notification INVALID_PAYLOAD_TYPE to 192.1.2.45:59276 192.1.2.45:42816: message ignored because it contains a payload type (ISAKMP_NEXT_SIG) unexpected by state STATE_MAIN_R0 192.1.2.45:42816: sending notification INVALID_PAYLOAD_TYPE to 192.1.2.45:42816 ]0;root@swantest:/home/build/libreswan/testing/pluto/ikev1-03-fuzzer[root@east ikev1-03-fuzzer]# : ==== cut ==== ]0;root@swantest:/home/build/libreswan/testing/pluto/ikev1-03-fuzzer[root@east ikev1-03-fuzzer]# ipsec auto --status whack: Pluto is not running (no "/run/pluto/pluto.ctl") ]0;root@swantest:/home/build/libreswan/testing/pluto/ikev1-03-fuzzer[root@east ikev1-03-fuzzer 33]# >>>>>>>>>>cutnonzeroexit>>>>>>>>>> exit status 33 final.sh 'ipsec auto --status' <<<<<<<<<>>>>>>>>>cutnonzeroexit>>>>>>>>>> exit status 1 final.sh 'if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi' <<<<<<<<<>>>>>>>>>cut>>>>>>>>>> done <<<<<<<<<