/testing/guestbin/swan-prep
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# cp test.conf /tmp/test.conf
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# ipsec pluto --config /tmp/test.conf
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# /testing/pluto/bin/wait-until-pluto-started
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# echo "initdone"
initdone
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# # did pluto forked addconn pickup right config file location and load the connection
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# ipsec status | grep westnet-eastnet-ipv4-psk-ikev2 | grep "eroute owner"
000 "westnet-eastnet-ipv4-psk-ikev2": 192.0.1.0/24===192.1.2.45<192.1.2.45>[@west]...192.1.2.23<192.1.2.23>[@east]===192.0.2.0/24; unrouted; eroute owner: #0
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# # does status show /tmp/test.conf as config file used for startup
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# ipsec status | grep configfile
000 configdir=/etc, configfile=/tmp/test.conf, secrets=/etc/ipsec.secrets, ipsecdir=/etc/ipsec.d
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# # rhbz#1645137 test
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# ipsec addconn --config /tmp/test.conf longike
002 added IKEv2 connection "longike"
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# ipsec whack --shutdown # stop will cause reading /etc/ipsec.conf
002 shutting down
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# # rhbz#1625303 test
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# cp bomb.conf /etc/ipsec.conf
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# cp include-bomb.conf /etc/ipsec.d/
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# restorecon /etc/ipsec.conf /etc/ipsec.d/include-bomb.conf
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# # should fail properly at maxdepth recursion
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# ipsec addconn --verbose --config /etc/ipsec.conf --checkconfig
opening file: /etc/ipsec.conf
debugging mode enabled
including file '/etc/ipsec.d/include-bomb.conf' ('/etc/ipsec.d/include-bomb.conf') from /etc/ipsec.conf:9
including file '/etc/ipsec.d/include-bomb.conf' ('/etc/ipsec.d/include-bomb.conf') from /etc/ipsec.d/include-bomb.conf:3
including file '/etc/ipsec.d/include-bomb.conf' ('/etc/ipsec.d/include-bomb.conf') from /etc/ipsec.d/include-bomb.conf:3
including file '/etc/ipsec.d/include-bomb.conf' ('/etc/ipsec.d/include-bomb.conf') from /etc/ipsec.d/include-bomb.conf:3
including file '/etc/ipsec.d/include-bomb.conf' ('/etc/ipsec.d/include-bomb.conf') from /etc/ipsec.d/include-bomb.conf:3
including file '/etc/ipsec.d/include-bomb.conf' ('/etc/ipsec.d/include-bomb.conf') from /etc/ipsec.d/include-bomb.conf:3
including file '/etc/ipsec.d/include-bomb.conf' ('/etc/ipsec.d/include-bomb.conf') from /etc/ipsec.d/include-bomb.conf:3
including file '/etc/ipsec.d/include-bomb.conf' ('/etc/ipsec.d/include-bomb.conf') from /etc/ipsec.d/include-bomb.conf:3
including file '/etc/ipsec.d/include-bomb.conf' ('/etc/ipsec.d/include-bomb.conf') from /etc/ipsec.d/include-bomb.conf:3
end of file /etc/ipsec.d/include-bomb.conf
resuming /etc/ipsec.d/include-bomb.conf:3
end of file /etc/ipsec.d/include-bomb.conf
resuming /etc/ipsec.d/include-bomb.conf:3
end of file /etc/ipsec.d/include-bomb.conf
resuming /etc/ipsec.d/include-bomb.conf:3
end of file /etc/ipsec.d/include-bomb.conf
resuming /etc/ipsec.d/include-bomb.conf:3
end of file /etc/ipsec.d/include-bomb.conf
resuming /etc/ipsec.d/include-bomb.conf:3
end of file /etc/ipsec.d/include-bomb.conf
resuming /etc/ipsec.d/include-bomb.conf:3
end of file /etc/ipsec.d/include-bomb.conf
resuming /etc/ipsec.d/include-bomb.conf:3
end of file /etc/ipsec.d/include-bomb.conf
resuming /etc/ipsec.d/include-bomb.conf:3
end of file /etc/ipsec.d/include-bomb.conf
resuming /etc/ipsec.conf:9
end of file /etc/ipsec.conf
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# echo done
done
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# ../bin/check-for-core.sh
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04]# if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi
]0;root@swantest:/home/build/libreswan/testing/pluto/addconn-04[root@west addconn-04 1]# >>>>>>>>>>cutnonzeroexit>>>>>>>>>> exit status 1 final.sh 'if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi' <<<<<<<<<<tuc<<<<<<<<<<>>>>>>>>>>cut>>>>>>>>>> done <<<<<<<<<<tuc<<<<<<<<<<