/testing/guestbin/swan-prep --x509
Preparing X.509 files
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01]# ipsec start
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Error: Peer netns reference is invalid.
Redirecting to: namespaces direct start via ipsec pluto
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01]# /testing/pluto/bin/wait-until-pluto-started
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01]# ipsec auto --add north-east
002 added connection description "north-east"
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01]# echo "initdone"
initdone
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01]# # temp while the test still fails
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01]# ipsec whack --impair suppress-retransmits
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01]# ipsec auto --up north-east
002 "north-east" #1: initiating Aggressive Mode
002 "north-east" #1: I am sending a certificate request
002 "north-east" #1: IMPAIR: suppressing retransmits; scheduling timeout in 60 seconds
110 "north-east" #1: STATE_AGGR_I1: initiate
002 "north-east" #1: Peer ID is ID_DER_ASN1_DN: 'C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, E=user-east@testing.libreswan.org'
002 "north-east" #1: certificate verified OK: E=user-east@testing.libreswan.org,CN=east.testing.libreswan.org,OU=Test Department,O=Libreswan,L=Toronto,ST=Ontario,C=CA
003 "north-east" #1: Authenticated using RSA
002 "north-east" #1: I am sending my cert
004 "north-east" #1: STATE_AGGR_I2: sent AI2, ISAKMP SA established {auth=RSA_SIG cipher=AES_CBC_128 integ=HMAC_SHA1 group=MODP2048}
002 "north-east" #2: initiating Quick Mode RSASIG+ENCRYPT+TUNNEL+PFS+UP+AGGRESSIVE+IKEV1_ALLOW+SAREF_TRACK+IKE_FRAG_ALLOW+ESN_NO {using isakmp#1 msgid:969bb925 proposal=AES_CBC_128-HMAC_SHA1_96 pfsgroup=MODP2048}
002 "north-east" #2: IMPAIR: suppressing retransmits; scheduling timeout in 60 seconds
115 "north-east" #2: STATE_QUICK_I1: initiate
004 "north-east" #2: STATE_QUICK_I2: sent QI2, IPsec SA established tunnel mode {ESP=>0xc62472e9 <0x701e44c7 xfrm=AES_CBC_128-HMAC_SHA1_96 NATOA=none NATD=none DPD=passive}
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01]# echo done
done
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01]# # should not match anything
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01]# grep "already in use" /tmp/pluto.log
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01 1]# >>>>>>>>>>cutnonzeroexit>>>>>>>>>> exit status 1 final.sh 'grep "already in use" /tmp/pluto.log' <<<<<<<<<<tuc<<<<<<<<<<# should only show 1 connection
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01 1]# >>>>>>>>>>cutnonzeroexit>>>>>>>>>> exit status 1 final.sh '# should only show 1 connection' <<<<<<<<<<tuc<<<<<<<<<<ipsec whack --trafficstatus
006 #2: "north-east", type=ESP, add_time=0, inBytes=0, outBytes=0, id='C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, E=user-east@testing.libreswan.org'
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01]# : ==== cut ====
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01]# ipsec auto --status
whack: is Pluto running?  connect() for "/run/pluto/pluto.ctl" failed (111 Connection refused)
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01 33]# >>>>>>>>>>cutnonzeroexit>>>>>>>>>> exit status 33 final.sh 'ipsec auto --status' <<<<<<<<<<tuc<<<<<<<<<<: ==== tuc ====
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01]# ../bin/check-for-core.sh
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01]# if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01 1]# >>>>>>>>>>cutnonzeroexit>>>>>>>>>> exit status 1 final.sh 'if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi' <<<<<<<<<<tuc<<<<<<<<<<: ==== end ====
kroot@swantest:/home/build/libreswan/testing/pluto/ikev1-aggr-sendcert-01\[root@north ikev1-aggr-sendcert-01]#