echo "init done, nothing to do on north. It will not use IPsec"
init done, nothing to do on north. It will not use IPsec
north #
 # ping should succeed
north #
 echo "north is sending pings"
north is sending pings
north #
 ping -n -c 5 -I 192.1.3.33 192.1.2.23
PING 192.1.2.23 (192.1.2.23) from 192.1.3.33 : 56(84) bytes of data.
64 bytes from 192.1.2.23: icmp_seq=1 ttl=63 time=0.XXX ms
64 bytes from 192.1.2.23: icmp_seq=2 ttl=63 time=0.XXX ms
64 bytes from 192.1.2.23: icmp_seq=3 ttl=63 time=0.XXX ms
64 bytes from 192.1.2.23: icmp_seq=4 ttl=63 time=0.XXX ms
64 bytes from 192.1.2.23: icmp_seq=5 ttl=63 time=0.XXX ms
--- 192.1.2.23 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time XXXX
rtt min/avg/max/mdev = 0.XXX/0.XXX/0.XXX/0.XXX ms
north #
 echo "waiting while road sets up a tunnel to confirm there is no interference"
waiting while road sets up a tunnel to confirm there is no interference
north #
 # ping should succeed
north #
 echo "north is sending pings again"
north is sending pings again
north #
 ping -n -c 5 -I 192.1.3.33 192.1.2.23
PING 192.1.2.23 (192.1.2.23) from 192.1.3.33 : 56(84) bytes of data.
64 bytes from 192.1.2.23: icmp_seq=1 ttl=63 time=0.XXX ms
64 bytes from 192.1.2.23: icmp_seq=2 ttl=63 time=0.XXX ms
64 bytes from 192.1.2.23: icmp_seq=3 ttl=63 time=0.XXX ms
64 bytes from 192.1.2.23: icmp_seq=4 ttl=63 time=0.XXX ms
64 bytes from 192.1.2.23: icmp_seq=5 ttl=63 time=0.XXX ms
--- 192.1.2.23 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time XXXX
rtt min/avg/max/mdev = 0.XXX/0.XXX/0.XXX/0.XXX ms
north #
 echo "pings sent"
pings sent
north #