--- road.console.txt 2019-09-20 17:49:12.297191459 +0000 +++ OUTPUT/road.console.txt 2019-09-21 07:23:38.859509307 +0000 @@ -45,18 +45,14 @@ road # ping -n -c 2 -I 192.1.3.209 192.1.3.130 PING 192.1.3.130 (192.1.3.130) from 192.1.3.209 : 56(84) bytes of data. -64 bytes from 192.1.3.130: icmp_seq=1 ttl=64 time=0.XXX ms -64 bytes from 192.1.3.130: icmp_seq=2 ttl=64 time=0.XXX ms --- 192.1.3.130 ping statistics --- -2 packets transmitted, 2 received, 0% packet loss, time XXXX -rtt min/avg/max/mdev = 0.XXX/0.XXX/0.XXX/0.XXX ms +2 packets transmitted, 0 received, 100% packet loss, time XXXX road # sleep 1 road # # should show established tunnel and no bare shunts road # ipsec whack --trafficstatus -006 #2: "private-or-clear#192.1.3.128/27"[1] ...192.1.3.130, type=ESP, add_time=1234567890, inBytes=168, outBytes=168, id='C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, E=user-east@testing.libreswan.org' road # ipsec whack --shuntstatus 000 Bare Shunt list: @@ -72,12 +68,12 @@ # A tunnel should have established with non-zero byte counters road # ip addr show scope global -2: eth0: mtu 1500 qdisc fq_codel state UP group default - link/ether 12:00:00:ab:cd:02 brd ff:ff:ff:ff:ff:ff - inet 192.1.3.209/24 brd 192.1.3.255 scope global eth0 - valid_lft forever preferred_lft forever -3: ip_vti0@NONE: mtu XXXX qdisc noop state DOWN group default +2: ip_vti0@NONE: mtu XXXX qdisc noop state DOWN group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 +3881: eth0@if3882: mtu 1500 qdisc noqueue state UP group default qlen 1000 + link/ether 1e:01:9e:78:07:20 brd ff:ff:ff:ff:ff:ff link-netnsid 0 + inet 192.1.3.209/24 scope global eth0 + valid_lft forever preferred_lft forever road # # jacob two two for east? road # @@ -121,6 +117,8 @@ dir out priority 1564644 ptype main tmpl src 0.0.0.0 dst 0.0.0.0 proto esp reqid REQID mode transport +src 192.1.3.209/32 dst 192.1.3.130/32 + dir out priority 1564644 ptype main XFRM done IPSEC mangle TABLES NEW_IPSEC_CONN mangle TABLES @@ -141,8 +139,6 @@ # you should see both RSA and NULL road # grep IKEv2_AUTH_ /tmp/pluto.log -| auth method: IKEv2_AUTH_NULL (0xd) -| auth method: IKEv2_AUTH_RSA (0x1) road # road # ../bin/check-for-core.sh