/testing/guestbin/swan-prep --x509
Preparing X.509 files
west #
certutil -d sql:/etc/ipsec.d -D -n east
west #
ipsec start
Redirecting to: [initsystem]
west #
/testing/pluto/bin/wait-until-pluto-started
west #
ipsec auto --add nss-cert-crl
002 added connection description "nss-cert-crl"
west #
ipsec auto --status |grep nss-cert-crl
000 "nss-cert-crl": 192.0.1.254/32===192.1.2.45<192.1.2.45>[C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=west.testing.libreswan.org, E=user-west@testing.libreswan.org]...192.1.2.23<192.1.2.23>[%fromcert]===192.0.2.254/32; unrouted; eroute owner: #0
000 "nss-cert-crl": oriented; my_ip=192.0.1.254; their_ip=192.0.2.254; mycert=west; my_updown=ipsec _updown;
000 "nss-cert-crl": xauth us:none, xauth them:none, my_username=[any]; their_username=[any]
000 "nss-cert-crl": our auth:rsasig, their auth:rsasig
000 "nss-cert-crl": modecfg info: us:none, them:none, modecfg policy:push, dns:unset, domains:unset, banner:unset, cat:unset;
000 "nss-cert-crl": labeled_ipsec:no;
000 "nss-cert-crl": policy_label:unset;
000 "nss-cert-crl": CAs: 'C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=Libreswan test CA for mainca, E=testing@libreswan.org'...'%any'
000 "nss-cert-crl": ike_life: 3600s; ipsec_life: 28800s; replay_window: 32; rekey_margin: 540s; rekey_fuzz: 100%; keyingtries: 0;
000 "nss-cert-crl": retransmit-interval: 9999ms; retransmit-timeout: 99s;
000 "nss-cert-crl": initial-contact:no; cisco-unity:no; fake-strongswan:no; send-vendorid:no; send-no-esp-tfc:no;
000 "nss-cert-crl": policy: RSASIG+ENCRYPT+TUNNEL+PFS+IKEV1_ALLOW+SAREF_TRACK+IKE_FRAG_ALLOW+ESN_NO;
000 "nss-cert-crl": conn_prio: 32,32; interface: eth1; metric: 0; mtu: unset; sa_prio:auto; sa_tfc:none;
000 "nss-cert-crl": nflog-group: unset; mark: unset; vti-iface:unset; vti-routing:no; vti-shared:no; nic-offload:auto;
000 "nss-cert-crl": our idtype: ID_DER_ASN1_DN; our id=C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=west.testing.libreswan.org, E=user-west@testing.libreswan.org; their idtype: %fromcert; their id=%fromcert
000 "nss-cert-crl": dpd: action:hold; delay:0; timeout:0; nat-t: encaps:auto; nat_keepalive:yes; ikev1_natt:both
000 "nss-cert-crl": newest ISAKMP SA: #0; newest IPsec SA: #0;
west #
echo "initdone"
initdone
west #
ipsec auto --up nss-cert-crl
002 "nss-cert-crl" #1: initiating Main Mode
1v1 "nss-cert-crl" #1: STATE_MAIN_I1: initiate
1v1 "nss-cert-crl" #1: STATE_MAIN_I2: sent MI2, expecting MR2
002 "nss-cert-crl" #1: I am sending my cert
002 "nss-cert-crl" #1: I am sending a certificate request
1v1 "nss-cert-crl" #1: STATE_MAIN_I3: sent MI3, expecting MR3
002 "nss-cert-crl" #1: Peer ID is ID_DER_ASN1_DN: 'C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, E=user-east@testing.libreswan.org'
002 "nss-cert-crl" #1: certificate verified OK: E=user-east@testing.libreswan.org,CN=east.testing.libreswan.org,OU=Test Department,O=Libreswan,L=Toronto,ST=Ontario,C=CA
003 "nss-cert-crl" #1: Authenticated using RSA
004 "nss-cert-crl" #1: STATE_MAIN_I4: ISAKMP SA established {auth=RSA_SIG cipher=AES_CBC_256 integ=HMAC_SHA2_256 group=MODP2048}
002 "nss-cert-crl" #2: initiating Quick Mode RSASIG+ENCRYPT+TUNNEL+PFS+UP+IKEV1_ALLOW+SAREF_TRACK+IKE_FRAG_ALLOW+ESN_NO
1v1 "nss-cert-crl" #2: STATE_QUICK_I1: initiate
004 "nss-cert-crl" #2: STATE_QUICK_I2: sent QI2, IPsec SA established tunnel mode {ESP=>0xESPESP <0xESPESP xfrm=AES_CBC_128-HMAC_SHA1_96 NATOA=none NATD=none DPD=passive}
west #
echo done
done
west #
crlutil -L -d sql:/etc/ipsec.d | grep mainca
west #
ipsec auto --listall | grep -A10 "List of CRLs" | grep -E 'Issuer|Entry|Serial'
west #
west #
ipsec stop
Redirecting to: [initsystem]
west #
ipsec status
whack: Pluto is not running (no "/run/pluto/pluto.ctl")
west #
grep '^leak' /tmp/pluto.log
leak-detective enabled
leak detective found no leaks
west #
../bin/check-for-core.sh
west #
if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi