/testing/guestbin/swan-prep --x509
Preparing X.509 files
road #
 ipsec start
Redirecting to: [initsystem]
road #
 /testing/pluto/bin/wait-until-pluto-started
road #
 ipsec auto --add road-east
002 added connection description "road-east"
road #
 echo initdone
initdone
road #
 ../bin/block-non-ipsec.sh
road #
 ipsec whack --xauthname 'xroad' --xauthpass 'use1pass' --name road-east --initiate
002 "road-east" #1: initiating Main Mode
1v1 "road-east" #1: STATE_MAIN_I1: initiate
1v1 "road-east" #1: STATE_MAIN_I2: sent MI2, expecting MR2
002 "road-east" #1: I am sending my cert
002 "road-east" #1: I am sending a certificate request
1v1 "road-east" #1: STATE_MAIN_I3: sent MI3, expecting MR3
002 "road-east" #1: Peer ID is ID_DER_ASN1_DN: 'C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, E=user-east@testing.libreswan.org'
002 "road-east" #1: certificate verified OK: E=user-east@testing.libreswan.org,CN=east.testing.libreswan.org,OU=Test Department,O=Libreswan,L=Toronto,ST=Ontario,C=CA
003 "road-east" #1: Authenticated using RSA
004 "road-east" #1: STATE_MAIN_I4: ISAKMP SA established {auth=RSA_SIG cipher=AES_CBC_256 integ=HMAC_SHA2_256 group=MODP2048}
041 "road-east" #1: road-east prompt for Username:
040 "road-east" #1: road-east prompt for Password:
002 "road-east" #1: XAUTH: Answering XAUTH challenge with user='xroad'
004 "road-east" #1: STATE_XAUTH_I1: XAUTH client - possibly awaiting CFG_set {auth=RSA_SIG cipher=AES_CBC_256 integ=HMAC_SHA2_256 group=MODP2048}
002 "road-east" #1: XAUTH: Successfully Authenticated
004 "road-east" #1: STATE_XAUTH_I1: XAUTH client - possibly awaiting CFG_set {auth=RSA_SIG cipher=AES_CBC_256 integ=HMAC_SHA2_256 group=MODP2048}
002 "road-east" #1: modecfg: Sending IP request (MODECFG_I1)
005 "road-east" #1: Received IPv4 address: 192.0.2.101/32
005 "road-east" #1: Received DNS server 1.2.3.4
005 "road-east" #1: Received DNS server 5.6.7.8
005 "road-east" #1: Received subnet 192.0.2.0/24
005 "road-east" #1: Subnet 192.0.2.0/24 already has an spd_route - ignoring
004 "road-east" #1: STATE_MAIN_I4: ISAKMP SA established {auth=RSA_SIG cipher=AES_CBC_256 integ=HMAC_SHA2_256 group=MODP2048}
002 "road-east" #2: initiating Quick Mode RSASIG+ENCRYPT+TUNNEL+PFS+UP+XAUTH+MODECFG_PULL+IKEV1_ALLOW+SAREF_TRACK+IKE_FRAG_ALLOW+ESN_NO
1v1 "road-east" #2: STATE_QUICK_I1: initiate
002 "road-east" #2: up-client output: updating resolvconf
004 "road-east" #2: STATE_QUICK_I2: sent QI2, IPsec SA established tunnel mode {ESP=>0xESPESP <0xESPESP xfrm=AES_CBC_128-HMAC_SHA1_96 NATOA=none NATD=none DPD=passive username=xroad}
road #
 ping -q -w 4 -n -c 4 192.0.2.254
PING 192.0.2.254 (192.0.2.254) 56(84) bytes of data.
--- 192.0.2.254 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time XXXX
rtt min/avg/max/mdev = 0.XXX/0.XXX/0.XXX/0.XXX ms
road #
 ipsec whack --trafficstatus
006 #2: "road-east", username=xroad, type=ESP, add_time=1234567890, inBytes=336, outBytes=336
road #
 echo done
done
road #
 # let road and north wait for east to show tunnels before shutting down
road #
 hostname | grep road > /dev/null && sleep 5
road #
 hostname | grep north > /dev/null && sleep 5
road #
 hostname | grep east > /dev/null && ipsec whack --trafficstatus
road #
road #
 grep "^leak" /tmp/pluto.log
leak-detective enabled
leak detective found no leaks
road #
 ../bin/check-for-core.sh
road #
 if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi