/testing/guestbin/swan-prep --x509 Preparing X.509 files north # # ensure that clear text does not get through north # iptables -A INPUT -i eth1 -s 192.0.2.254/32 -j LOGDROP north # # confirm clear text does not get through north # ping -c 4 -n -I 192.0.3.254 192.0.2.254 PING 192.0.2.254 (192.0.2.254) from 192.0.3.254 : 56(84) bytes of data. --- 192.0.2.254 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time XXXX north # ipsec start Redirecting to: [initsystem] north # /testing/pluto/bin/wait-until-pluto-started north # ipsec auto --add northnet-eastnet-nat 002 added connection description "northnet-eastnet-nat" north # ipsec whack --impair suppress-retransmits north # echo "initdone" initdone north # ipsec auto --up northnet-eastnet-nat 002 "northnet-eastnet-nat" #1: initiating Main Mode 1v1 "northnet-eastnet-nat" #1: STATE_MAIN_I1: initiate 1v1 "northnet-eastnet-nat" #1: STATE_MAIN_I2: sent MI2, expecting MR2 002 "northnet-eastnet-nat" #1: I am sending my cert 002 "northnet-eastnet-nat" #1: I am sending a certificate request 1v1 "northnet-eastnet-nat" #1: STATE_MAIN_I3: sent MI3, expecting MR3 002 "northnet-eastnet-nat" #1: Peer ID is ID_DER_ASN1_DN: 'C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, E=user-east@testing.libreswan.org' 002 "northnet-eastnet-nat" #1: certificate verified OK: E=user-east@testing.libreswan.org,CN=east.testing.libreswan.org,OU=Test Department,O=Libreswan,L=Toronto,ST=Ontario,C=CA 003 "northnet-eastnet-nat" #1: Authenticated using RSA 004 "northnet-eastnet-nat" #1: STATE_MAIN_I4: ISAKMP SA established {auth=RSA_SIG cipher=AES_CBC_256 integ=HMAC_SHA2_256 group=MODP2048} 002 "northnet-eastnet-nat" #2: initiating Quick Mode RSASIG+ENCRYPT+TUNNEL+PFS+UP+IKEV1_ALLOW+SAREF_TRACK+IKE_FRAG_ALLOW+ESN_NO 1v1 "northnet-eastnet-nat" #2: STATE_QUICK_I1: initiate 004 "northnet-eastnet-nat" #2: STATE_QUICK_I2: sent QI2, IPsec SA established tunnel mode {ESP/NAT=>0xESPESP <0xESPESP xfrm=AES_CBC_128-HMAC_SHA1_96 NATOA=none NATD=192.1.2.23:4500 DPD=passive} north # ping -n -c 3 -I 192.0.3.254 192.0.2.254 PING 192.0.2.254 (192.0.2.254) from 192.0.3.254 : 56(84) bytes of data. [ 00.00] IN=eth1 OUT= MAC=12:00:00:96:96:49:12:00:00:32:64:ba:08:00 SRC=192.0.2.254 DST=192.0.3.254 LEN=XXXX TOS=0x00 PREC=0x00 TTL=64 ID=XXXXX PROTO=ICMP TYPE=0 CODE=0 ID=XXXX SEQ=1 [ 00.00] IN=eth1 OUT= MAC=12:00:00:96:96:49:12:00:00:32:64:ba:08:00 SRC=192.0.2.254 DST=192.0.3.254 LEN=XXXX TOS=0x00 PREC=0x00 TTL=64 ID=XXXXX PROTO=ICMP TYPE=0 CODE=0 ID=XXXX SEQ=2 [ 00.00] IN=eth1 OUT= MAC=12:00:00:96:96:49:12:00:00:32:64:ba:08:00 SRC=192.0.2.254 DST=192.0.3.254 LEN=XXXX TOS=0x00 PREC=0x00 TTL=64 ID=XXXXX PROTO=ICMP TYPE=0 CODE=0 ID=XXXX SEQ=3 --- 192.0.2.254 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time XXXX north # echo done done north # north # grep 'Result using RFC 3947' /tmp/pluto.log | NAT-Traversal: Result using RFC 3947 (NAT-Traversal) sender port 500: I am behind NAT north # ../bin/check-for-core.sh north # if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi