/testing/guestbin/swan-prep kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# # confirm that the network is alive kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# ../../pluto/bin/wait-until-alive -I 192.0.1.254 192.0.2.254 destination -I 192.0.1.254 192.0.2.254 is alive kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# ipsec start Error: Peer netns reference is invalid. Error: Peer netns reference is invalid. Error: Peer netns reference is invalid. Error: Peer netns reference is invalid. Error: Peer netns reference is invalid. Error: Peer netns reference is invalid. Error: Peer netns reference is invalid. Error: Peer netns reference is invalid. Redirecting to: /etc/init.d/ipsec start Error: Peer netns reference is invalid. Error: Peer netns reference is invalid. Error: Peer netns reference is invalid. Error: Peer netns reference is invalid. Error: Peer netns reference is invalid. Error: Peer netns reference is invalid. Error: Peer netns reference is invalid. Error: Peer netns reference is invalid. Starting pluto IKE daemon for IPsec: kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# /testing/pluto/bin/wait-until-pluto-started kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# ipsec auto --add west-east 002 added connection description "west-east" kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# echo "initdone" initdone kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# ipsec auto --up west-east 002 "west-east" #1: initiating Main Mode 102 "west-east" #1: STATE_MAIN_I1: initiate 104 "west-east" #1: STATE_MAIN_I2: sent MI2, expecting MR2 106 "west-east" #1: STATE_MAIN_I3: sent MI3, expecting MR3 002 "west-east" #1: Peer ID is ID_FQDN: '@east' 003 "west-east" #1: Authenticated using RSA 004 "west-east" #1: STATE_MAIN_I4: ISAKMP SA established {auth=RSA_SIG cipher=AES_CBC_256 integ=HMAC_SHA2_256 group=MODP2048} 002 "west-east" #2: initiating Quick Mode RSASIG+ENCRYPT+TUNNEL+PFS+UP+IKEV1_ALLOW+SAREF_TRACK+IKE_FRAG_ALLOW+ESN_NO {using isakmp#1 msgid:59378f60 proposal=defaults pfsgroup=MODP2048} 115 "west-east" #2: STATE_QUICK_I1: initiate 004 "west-east" #2: STATE_QUICK_I2: sent QI2, IPsec SA established tunnel mode {ESP=>0xca39120c <0xb58c4d04 xfrm=AES_CBC_128-HMAC_SHA1_96 NATOA=none NATD=none DPD=passive} kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# # suppress martian logging before we create havoc kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# echo 0 > /proc/sys/net/ipv4/conf/default/log_martians kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# echo 0 > /proc/sys/net/ipv4/conf/all/log_martians kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# # add east's ip on west to shoot in foot kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# ip addr add 192.1.2.23/24 dev eth1 kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# ipsec auto --ready 002 listening for IKE messages 002 adding interface eth1/eth1 (esp-hw-offload not supported by kernel) 192.1.2.23:500 002 adding interface eth1/eth1 192.1.2.23:4500 003 two interfaces match "west-east" (eth1, eth1) 002 "west-east": terminating SAs using this connection 002 "west-east" #2: deleting state (STATE_QUICK_I2) aged 0.364s and sending notification 005 "west-east" #2: ESP traffic information: in=0B out=0B 002 "west-east" #1: deleting state (STATE_MAIN_I4) aged 0.387s and sending notification 002 forgetting secrets 002 loading secrets from "/etc/ipsec.secrets" 002 loaded private key for keyid: PKK_RSA:AQOm9dY/4 kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# sleep 30 kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# echo done done kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# ipsec whack --shutdown 002 shutting down kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# : ==== cut ==== kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01]# ipsec auto --status whack: Pluto is not running (no "/run/pluto/pluto.ctl") kroot@swantest:/home/build/libreswan/testing/pluto/listen-change-01\[root@west listen-change-01 33]# >>>>>>>>>>cutnonzeroexit>>>>>>>>>> exit status 33 final.sh 'ipsec auto --status' <<<<<<<<<