/testing/guestbin/swan-prep
road #
 # delete the address 193.1.33.222 before re-run. otherwise pluto may choose it.
road #
 ip addr show dev eth0 | grep 192.1.33.222 && ip addr del 192.1.33.222/24 dev eth0
road #
 ip route show scope global | grep "192.1.33.254" && ip route del default via 192.1.33.254
road #
 # add .209 for re-run
road #
 ip addr show dev eth0 | grep 192.1.3.209 || ip addr add 192.1.3.209/24 dev eth0
    inet 192.1.3.209/24 scope global eth0
road #
 # add default gw, it could have been deleted due address changes
road #
 ip route | grep default || ip route add default via 192.1.3.254
default via 192.1.3.254 dev eth0
road #
 # routes and addresses setup for the test
road #
 ipsec start
Redirecting to: [initsystem]
road #
 /testing/pluto/bin/wait-until-pluto-started
road #
 ipsec auto --add road-eastnet
002 added connection description "road-eastnet"
road #
 echo "initdone"
initdone
road #
 ipsec auto --up road-eastnet
002 "road-eastnet"[1] 192.1.2.23 #1: initiating v2 parent SA
1v2 "road-eastnet"[1] 192.1.2.23 #1: initiate
1v2 "road-eastnet"[1] 192.1.2.23 #1: STATE_PARENT_I1: sent v2I1, expected v2R1
1v2 "road-eastnet"[1] 192.1.2.23 #2: STATE_PARENT_I2: sent v2I2, expected v2R2 {auth=IKEv2 cipher=AES_GCM_16_256 integ=n/a prf=HMAC_SHA2_512 group=MODP2048}
003 "road-eastnet"[1] 192.1.2.23 #2: Authenticated using authby=secret
002 "road-eastnet"[1] 192.1.2.23 #2: received INTERNAL_IP4_ADDRESS 192.0.3.10
002 "road-eastnet"[1] 192.1.2.23 #2: negotiated connection [192.0.3.10-192.0.3.10:0-65535 0] -> [0.0.0.0-255.255.255.255:0-65535 0]
004 "road-eastnet"[1] 192.1.2.23 #2: STATE_V2_IPSEC_I: IPsec SA established tunnel mode {ESP=>0xESPESP <0xESPESP xfrm=AES_CBC_256-HMAC_SHA2_256_128 NATOA=none NATD=none DPD=passive}
road #
 # note this end should be 192.1.3.209
road #
 ../../pluto/bin/ipsec-look.sh
road NOW
XFRM state:
src 192.1.2.23 dst 192.1.3.209
	proto esp spi 0xSPISPI reqid REQID mode tunnel
	enc cbc(aes) 0xENCKEY
src 192.1.3.209 dst 192.1.2.23
	proto esp spi 0xSPISPI reqid REQID mode tunnel
	enc cbc(aes) 0xENCKEY
XFRM policy:
src 0.0.0.0/0 dst 192.0.3.10/32
	dir fwd priority 1040383 ptype main
	tmpl src 192.1.2.23 dst 192.1.3.209
src 0.0.0.0/0 dst 192.0.3.10/32
	dir in priority 1040383 ptype main
	tmpl src 192.1.2.23 dst 192.1.3.209
src 192.0.3.10/32 dst 0.0.0.0/0
	dir out priority 1040383 ptype main
	tmpl src 192.1.3.209 dst 192.1.2.23
XFRM done
IPSEC mangle TABLES
NEW_IPSEC_CONN mangle TABLES
ROUTING TABLES
0.0.0.0/1 dev eth0 scope link src 192.0.3.10
default via 192.1.3.254 dev eth0
128.0.0.0/1 dev eth0 scope link src 192.0.3.10
192.1.3.0/24 dev eth0 proto kernel scope link src 192.1.3.209
NSS_CERTIFICATES
Certificate Nickname                                         Trust Attributes
                                                             SSL,S/MIME,JAR/XPI
road #
 ping -W 1 -q -n -c 2 -I 192.0.3.10 192.0.2.254
PING 192.0.2.254 (192.0.2.254) from 192.0.3.10 : 56(84) bytes of data.
--- 192.0.2.254 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time XXXX
rtt min/avg/max/mdev = 0.XXX/0.XXX/0.XXX/0.XXX ms
road #
 ipsec whack --trafficstatus
006 #2: "road-eastnet"[1] 192.1.2.23, type=ESP, add_time=1234567890, inBytes=168, outBytes=168, id='192.1.2.23', lease=192.0.3.10/32
road #
 sleep 5
road #
 # remove this end ip next one will take over
road #
 ip addr show  scope global
2: ip_vti0@NONE: <NOARP> mtu XXXX qdisc noop state DOWN group default qlen 1000
    link/ipip 0.0.0.0 brd 0.0.0.0
22381: eth0@if22382: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether e2:9b:a6:48:10:90 brd ff:ff:ff:ff:ff:ff link-netnsid 0
    inet 192.1.3.209/24 scope global eth0
       valid_lft forever preferred_lft forever
road #
 ip route
0.0.0.0/1 dev eth0 scope link src 192.0.3.10
default via 192.1.3.254 dev eth0
128.0.0.0/1 dev eth0 scope link src 192.0.3.10
192.1.3.0/24 dev eth0 proto kernel scope link src 192.1.3.209
road #
 ip route show scope global | grep 192.1.3.254 && ip route del default via 192.1.3.254
default via 192.1.3.254 dev eth0
road #
 ip addr del 192.1.3.209/24 dev eth0
road #
 # removed address and route
road #
 sleep 5
road #
 ip addr show  scope global
2: ip_vti0@NONE: <NOARP> mtu XXXX qdisc noop state DOWN group default qlen 1000
    link/ipip 0.0.0.0 brd 0.0.0.0
22381: eth0@if22382: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether e2:9b:a6:48:10:90 brd ff:ff:ff:ff:ff:ff link-netnsid 0
road #
 ip route
road #
 # add new address and route
road #
 ip addr show dev eth0 | grep 192.1.33.209 || ip addr add 192.1.33.209/24 dev eth0
road #
 ip route show scope global | grep 192.1.33.254 || ip route add default via 192.1.33.254
road #
 # let libreswan detect change and do a MOBIKE update
road #
 ping -W 1 -q -n -c 2 -I 192.0.3.10 192.1.2.23
bind: Cannot assign requested address
road #
 sleep 10
road #
 ip addr show  scope global
2: ip_vti0@NONE: <NOARP> mtu XXXX qdisc noop state DOWN group default qlen 1000
    link/ipip 0.0.0.0 brd 0.0.0.0
22381: eth0@if22382: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
    link/ether e2:9b:a6:48:10:90 brd ff:ff:ff:ff:ff:ff link-netnsid 0
    inet 192.1.33.209/24 scope global eth0
       valid_lft forever preferred_lft forever
road #
 ip route
0.0.0.0/1 via 192.1.33.254 dev eth0 src 192.0.3.10
default via 192.1.33.254 dev eth0
128.0.0.0/1 via 192.1.33.254 dev eth0 src 192.0.3.10
192.1.33.0/24 dev eth0 proto kernel scope link src 192.1.33.209
road #
 # MOBIKE ping should work
road #
 # note this end should be 192.1.3.209
road #
 ping -W 1 -q -n -c 2 -I 192.0.3.10 192.1.2.23
PING 192.1.2.23 (192.1.2.23) from 192.0.3.10 : 56(84) bytes of data.
--- 192.1.2.23 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time XXXX
rtt min/avg/max/mdev = 0.XXX/0.XXX/0.XXX/0.XXX ms
road #
 echo done
done
road #
 ../../pluto/bin/ipsec-look.sh
road NOW
XFRM state:
src 192.1.2.23 dst 192.1.33.209
	proto esp spi 0xSPISPI reqid REQID mode tunnel
	enc cbc(aes) 0xENCKEY
src 192.1.33.209 dst 192.1.2.23
	proto esp spi 0xSPISPI reqid REQID mode tunnel
	enc cbc(aes) 0xENCKEY
XFRM policy:
src 0.0.0.0/0 dst 192.0.3.10/32
	dir fwd priority 1040383 ptype main
	tmpl src 192.1.2.23 dst 192.1.33.209
src 0.0.0.0/0 dst 192.0.3.10/32
	dir in priority 1040383 ptype main
	tmpl src 192.1.2.23 dst 192.1.33.209
src 192.0.3.10/32 dst 0.0.0.0/0
	dir out priority 1040383 ptype main
	tmpl src 192.1.33.209 dst 192.1.2.23
XFRM done
IPSEC mangle TABLES
NEW_IPSEC_CONN mangle TABLES
ROUTING TABLES
0.0.0.0/1 via 192.1.33.254 dev eth0 src 192.0.3.10
default via 192.1.33.254 dev eth0
128.0.0.0/1 via 192.1.33.254 dev eth0 src 192.0.3.10
192.1.33.0/24 dev eth0 proto kernel scope link src 192.1.33.209
NSS_CERTIFICATES
Certificate Nickname                                         Trust Attributes
                                                             SSL,S/MIME,JAR/XPI
road #
 ipsec whack --trafficstatus
006 #2: "road-eastnet"[1] 192.1.2.23, type=ESP, add_time=1234567890, inBytes=168, outBytes=168, id='192.1.2.23', lease=192.0.3.10/32
road #
 grep "MOBIKE " /tmp/pluto.log
| #1 MOBIKE new source address 192.1.33.209 remote 192.1.2.23 and gateway 192.1.33.254
| TODO: process v2N_NAT_DETECTION_SOURCE_IP in MOBIKE response 
| TODO: process v2N_NAT_DETECTION_DESTINATION_IP in MOBIKE response 
| #2 pst=#1 MOBIKE update local address 192.1.3.209:500 -> 192.1.33.209:500
"road-eastnet"[1] 192.1.2.23 #1:  success MOBIKE update local address 192.1.3.209:500 -> 192.1.33.209:500
"road-eastnet"[1] 192.1.2.23 #1: MOBIKE response: updating IPsec SA
| #1 MOBIKE new source address 192.1.33.209 remote 192.1.2.23 and gateway 192.1.33.254
| TODO: process v2N_NAT_DETECTION_SOURCE_IP in MOBIKE response 
| TODO: process v2N_NAT_DETECTION_DESTINATION_IP in MOBIKE response 
| #2 pst=#1 MOBIKE update local address 192.1.33.209:500 -> 192.1.33.209:500
"road-eastnet"[1] 192.1.2.23 #1:  success MOBIKE update local address 192.1.33.209:500 -> 192.1.33.209:500
"road-eastnet"[1] 192.1.2.23 #1: MOBIKE response: updating IPsec SA
road #
 sleep 7
road #
road #
 ../bin/check-for-core.sh
road #
 if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi