/testing/guestbin/swan-prep
east #
 ipsec start
Redirecting to: [initsystem]
east #
 /testing/pluto/bin/wait-until-pluto-started
east #
 ipsec auto --add east-any
002 added connection description "east-any"
east #
 echo "initdone"
initdone
east #
 ../../pluto/bin/ipsec-look.sh
east NOW
XFRM state:
src 192.1.33.209 dst 192.1.2.23
	proto esp spi 0xSPISPI reqid REQID mode tunnel
	enc cbc(aes) 0xENCKEY
src 192.1.2.23 dst 192.1.33.209
	proto esp spi 0xSPISPI reqid REQID mode tunnel
	enc cbc(aes) 0xENCKEY
XFRM policy:
src 0.0.0.0/0 dst 192.0.3.10/32
	dir out priority 1048543 ptype main
	tmpl src 192.1.2.23 dst 192.1.33.209
src 192.0.3.10/32 dst 0.0.0.0/0
	dir fwd priority 1048543 ptype main
	tmpl src 192.1.33.209 dst 192.1.2.23
src 192.0.3.10/32 dst 0.0.0.0/0
	dir in priority 1048543 ptype main
	tmpl src 192.1.33.209 dst 192.1.2.23
XFRM done
IPSEC mangle TABLES
NEW_IPSEC_CONN mangle TABLES
ROUTING TABLES
default via 192.1.2.254 dev eth1
192.0.1.0/24 via 192.1.2.45 dev eth1
192.0.2.0/24 dev eth0 proto kernel scope link src 192.0.2.254
192.1.2.0/24 dev eth1 proto kernel scope link src 192.1.2.23
NSS_CERTIFICATES
Certificate Nickname                                         Trust Attributes
                                                             SSL,S/MIME,JAR/XPI
east #
 ipsec whack --trafficstatus
006 #2: "east-any"[1] 192.1.33.209, type=ESP, add_time=1234567890, inBytes=168, outBytes=168, id='192.1.3.209', lease=192.0.3.10/32
east #
 grep "MOBIKE " /tmp/pluto.log
| #2 pst=#1 MOBIKE update remote address 192.1.3.209:500 -> 192.1.33.209:500
"east-any"[1] 192.1.3.209 #1:  success MOBIKE update remote address 192.1.3.209:500 -> 192.1.33.209:500
"east-any"[1] 192.1.33.209 #1: MOBIKE request: updating IPsec SA by request
| adding NATD payloads to MOBIKE response
| #2 pst=#1 MOBIKE update remote address 192.1.33.209:500 -> 192.1.33.209:500
"east-any"[1] 192.1.33.209 #1: MOBIKE success no change to kernel SA same IP address ad port  192.1.33.209:500
"east-any"[1] 192.1.33.209 #1: MOBIKE request: updating IPsec SA by request
| adding NATD payloads to MOBIKE response
east #
 sleep 7
east #
east #
 ../bin/check-for-core.sh
east #
 if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi