/testing/guestbin/swan-prep
north #
 # second address on north 193.1.8.22. nic gw 192.1.8.254
north #
 # delete the address 193.1.8.22 before re-run. otherwise pluto may choose it.
north #
 ip addr show dev eth1 | grep 192.1.8.22 && ip addr del 192.1.8.22/24 dev eth1
north #
 ip route show scope global | grep "192.1.8.254" && ip route del default via 192.1.8.254
north #
 # add .33 for re-run
north #
 ip addr show dev eth1 | grep 192.1.3.33 || ip addr add 192.1.3.33/24 dev eth1
    inet 192.1.3.33/24 scope global eth1
north #
 ip addr add 192.1.8.22/24 dev eth1
north #
 # add default gw, it could have been deleted due address changes
north #
 ip route | grep default || ip route add default via 192.1.3.254
default via 192.1.3.254 dev eth1
north #
 # routes and addresses setup for the test
north #
 ipsec start
Redirecting to: [initsystem]
north #
 /testing/pluto/bin/wait-until-pluto-started
north #
 ipsec auto --add northnet-eastnet
002 added connection description "northnet-eastnet"
north #
 ipsec whack --impair suppress-retransmits
north #
 echo "initdone"
initdone
north #
 ipsec auto --up northnet-eastnet
002 "northnet-eastnet" #1: initiating v2 parent SA
1v2 "northnet-eastnet" #1: initiate
1v2 "northnet-eastnet" #1: STATE_PARENT_I1: sent v2I1, expected v2R1
1v2 "northnet-eastnet" #2: STATE_PARENT_I2: sent v2I2, expected v2R2 {auth=IKEv2 cipher=AES_GCM_16_256 integ=n/a prf=HMAC_SHA2_512 group=MODP2048}
003 "northnet-eastnet" #2: Authenticated using authby=secret
002 "northnet-eastnet" #2: negotiated connection [192.0.3.0-192.0.3.255:0-65535 0] -> [192.0.2.0-192.0.2.255:0-65535 0]
004 "northnet-eastnet" #2: STATE_V2_IPSEC_I: IPsec SA established tunnel mode {ESP=>0xESPESP <0xESPESP xfrm=AES_CBC_256-HMAC_SHA2_256_128 NATOA=none NATD=none DPD=passive}
north #
 ping -W 1 -q -n -c 2 -I 192.0.3.254  192.0.2.254
PING 192.0.2.254 (192.0.2.254) from 192.0.3.254 : 56(84) bytes of data.
--- 192.0.2.254 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time XXXX
rtt min/avg/max/mdev = 0.XXX/0.XXX/0.XXX/0.XXX ms
north #
 ipsec whack --trafficstatus
006 #2: "northnet-eastnet", type=ESP, add_time=1234567890, inBytes=168, outBytes=168, id='192.1.2.23'
north #
 # note this end should be 192.1.3.33
north #
 ip xfrm state
src 192.1.2.23 dst 192.1.3.33
	proto esp spi 0xSPISPI reqid REQID mode tunnel
	enc cbc(aes) 0xENCKEY
src 192.1.3.33 dst 192.1.2.23
	proto esp spi 0xSPISPI reqid REQID mode tunnel
	enc cbc(aes) 0xENCKEY
north #
 ip xfrm policy
src 192.0.3.0/24 dst 192.0.2.0/24 
	dir out priority 1042407 ptype main 
	tmpl src 192.1.3.33 dst 192.1.2.23
src 192.0.2.0/24 dst 192.0.3.0/24 
	dir fwd priority 1042407 ptype main 
	tmpl src 192.1.2.23 dst 192.1.3.33
src 192.0.2.0/24 dst 192.0.3.0/24 
	dir in priority 1042407 ptype main 
	tmpl src 192.1.2.23 dst 192.1.3.33
north #
 sleep 5
north #
 # remove this end ip next one will take over
north #
 ip route show scope global | grep 192.1.3.254 && ip route del default via 192.1.3.254
default via 192.1.3.254 dev eth1
north #
 ip route show scope global | grep 192.1.8.254 || ip route add default via 192.1.8.254
north #
 ip addr del 192.1.3.33/24 dev eth1
north #
 # let libreswan detect change and do a MOBIKE update
north #
 sleep 10
north #
 # MOBIKE update and ping should work
north #
 # note this end should be 192.1.8.22
north #
 ping -W 1 -q -n -c 4 -I 192.0.3.254  192.0.2.254
PING 192.0.2.254 (192.0.2.254) from 192.0.3.254 : 56(84) bytes of data.
--- 192.0.2.254 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time XXXX
rtt min/avg/max/mdev = 0.XXX/0.XXX/0.XXX/0.XXX ms
north #
 echo done
done
north #
 ipsec whack --trafficstatus
006 #2: "northnet-eastnet", type=ESP, add_time=1234567890, inBytes=336, outBytes=336, id='192.1.2.23'
north #
 ip xfrm state
src 192.1.2.23 dst 192.1.8.22
	proto esp spi 0xSPISPI reqid REQID mode tunnel
	enc cbc(aes) 0xENCKEY
src 192.1.8.22 dst 192.1.2.23
	proto esp spi 0xSPISPI reqid REQID mode tunnel
	enc cbc(aes) 0xENCKEY
north #
 ip xfrm policy
src 192.0.3.0/24 dst 192.0.2.0/24 
	dir out priority 1042407 ptype main 
	tmpl src 192.1.8.22 dst 192.1.2.23
src 192.0.2.0/24 dst 192.0.3.0/24 
	dir fwd priority 1042407 ptype main 
	tmpl src 192.1.2.23 dst 192.1.8.22
src 192.0.2.0/24 dst 192.0.3.0/24 
	dir in priority 1042407 ptype main 
	tmpl src 192.1.2.23 dst 192.1.8.22
north #
north #
 ../bin/check-for-core.sh
north #
 if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi