/testing/guestbin/swan-prep
west #
 ipsec start
Redirecting to: [initsystem]
west #
 /testing/pluto/bin/wait-until-pluto-started
west #
 #ipsec auto --add west-east-auto
west #
 echo "initdone"
initdone
west #
 # wait for east to initiate to us
west #
 sleep 10
west #
 ping -n -c 4 192.1.2.23
PING 192.1.2.23 (192.1.2.23) 56(84) bytes of data.
64 bytes from 192.1.2.23: icmp_seq=1 ttl=64 time=0.XXX ms
64 bytes from 192.1.2.23: icmp_seq=2 ttl=64 time=0.XXX ms
64 bytes from 192.1.2.23: icmp_seq=3 ttl=64 time=0.XXX ms
64 bytes from 192.1.2.23: icmp_seq=4 ttl=64 time=0.XXX ms
--- 192.1.2.23 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time XXXX
rtt min/avg/max/mdev = 0.XXX/0.XXX/0.XXX/0.XXX ms
west #
 ipsec whack --trafficstatus
006 #2: "west-east-auto", type=ESP, add_time=1234567890, inBytes=336, outBytes=336, id='@east'
west #
 # sending delete/notify should cause east to re-initiate
west #
 ipsec auto --down west-east-auto
002 "west-east-auto": terminating SAs using this connection
002 "west-east-auto" #2: deleting state (STATE_V2_IPSEC_R) and sending notification
005 "west-east-auto" #2: ESP traffic information: in=336B out=336B
002 "west-east-auto" #1: deleting state (STATE_PARENT_R2) and sending notification
west #
 sleep 5
west #
 # A new IPsec SA should be established (without patch takes 30 seconds)
west #
 ipsec whack --trafficstatus
006 #4: "west-east-auto", type=ESP, add_time=1234567890, inBytes=0, outBytes=0, id='@east'
west #
 # traffic flow should still work
west #
 ping -n -c 4 192.1.2.23
PING 192.1.2.23 (192.1.2.23) 56(84) bytes of data.
64 bytes from 192.1.2.23: icmp_seq=1 ttl=64 time=0.XXX ms
64 bytes from 192.1.2.23: icmp_seq=2 ttl=64 time=0.XXX ms
64 bytes from 192.1.2.23: icmp_seq=3 ttl=64 time=0.XXX ms
64 bytes from 192.1.2.23: icmp_seq=4 ttl=64 time=0.XXX ms
--- 192.1.2.23 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time XXXX
rtt min/avg/max/mdev = 0.XXX/0.XXX/0.XXX/0.XXX ms
west #
 sleep 20
west #
 ipsec whack --trafficstatus
006 #4: "west-east-auto", type=ESP, add_time=1234567890, inBytes=336, outBytes=336, id='@east'
west #
west #
 ../bin/check-for-core.sh
west #
 if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi