/testing/guestbin/swan-prep --x509
Preparing X.509 files
north #
 ipsec start
Redirecting to: [initsystem]
north #
 /testing/pluto/bin/wait-until-pluto-started
north #
 ipsec auto --add road-eastnet-ikev2
002 added connection description "road-eastnet-ikev2"
north #
 echo "initdone"
initdone
north #
 ipsec whack --impair suppress-retransmits
north #
 ipsec auto --up road-eastnet-ikev2
002 "road-eastnet-ikev2" #1: initiating v2 parent SA
1v2 "road-eastnet-ikev2" #1: initiate
1v2 "road-eastnet-ikev2" #1: STATE_PARENT_I1: sent v2I1, expected v2R1
1v2 "road-eastnet-ikev2" #2: STATE_PARENT_I2: sent v2I2, expected v2R2 {auth=IKEv2 cipher=AES_GCM_16_256 integ=n/a prf=HMAC_SHA2_512 group=MODP2048}
002 "road-eastnet-ikev2" #2: certificate verified OK: E=user-east@testing.libreswan.org,CN=east.testing.libreswan.org,OU=Test Department,O=Libreswan,L=Toronto,ST=Ontario,C=CA
002 "road-eastnet-ikev2" #2: IKEv2 mode peer ID is ID_DER_ASN1_DN: 'C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, E=user-east@testing.libreswan.org'
003 "road-eastnet-ikev2" #2: Authenticated using RSA
002 "road-eastnet-ikev2" #2: negotiated connection [192.1.3.111-192.1.3.111:0-65535 0] -> [192.1.2.23-192.1.2.23:0-65535 0]
004 "road-eastnet-ikev2" #2: STATE_V2_IPSEC_I: IPsec SA established tunnel mode {ESP=>0xESPESP <0xESPESP xfrm=AES_GCM_16_256-NONE NATOA=none NATD=none DPD=passive}
north #
 # change ip to a new one and restart pluto
north #
 ip addr del 192.1.3.33/24 dev eth1
north #
 ip addr add 192.1.3.34/24 dev eth1
north #
 ip route add 0.0.0.0/0 via 192.1.3.254 dev eth1
north #
 killall -9 pluto
north #
 ipsec restart
Redirecting to: [initsystem]
Shutting down pluto IKE daemon
whack: is Pluto running?  connect() for "/run/pluto/pluto.ctl" failed (111 Connection refused)
..........
Attempt to shut Pluto down failed!  Trying kill
/etc/init.d/ipsec: line 162: kill: p: invalid signal specification
/etc/init.d/ipsec: line 120: 12021 Terminated              ${IPSEC_EXECDIR}/pluto --config ${IPSEC_CONF} ${PLUTO_OPTIONS}
north #
 /testing/pluto/bin/wait-until-pluto-started
whack: Pluto is not running (no "/run/pluto/pluto.ctl")
north #
 # temp while the test still fails
north #
 ipsec whack --impair suppress-retransmits
whack: Pluto is not running (no "/run/pluto/pluto.ctl")
north #
 ipsec auto --add road-eastnet-ikev2
connect(pluto_ctl) failed: No such file or directory
north #
 ipsec auto --up road-eastnet-ikev2
whack: Pluto is not running (no "/run/pluto/pluto.ctl")
north #
 echo done
done
north #
 # should not match anything
north #
 grep "already in use" /tmp/pluto.log
north #
 # should only show 1 connection
north #
 ipsec whack --trafficstatus
whack: Pluto is not running (no "/run/pluto/pluto.ctl")
north #
north #
 ../bin/check-for-core.sh
north #
 if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi