/testing/guestbin/swan-prep --x509
Preparing X.509 files
north #
 ipsec start
Redirecting to: [initsystem]
north #
 /testing/pluto/bin/wait-until-pluto-started
north #
 ipsec auto --add north-east
002 added connection description "north-east"
north #
 echo "initdone"
initdone
north #
 # temp while the test still fails
north #
 ipsec whack --impair suppress-retransmits
north #
 ipsec auto --up north-east
002 "north-east" #1: initiating Aggressive Mode
002 "north-east" #1: I am sending a certificate request
1v1 "north-east" #1: STATE_AGGR_I1: initiate
002 "north-east" #1: Peer ID is ID_DER_ASN1_DN: 'C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, E=user-east@testing.libreswan.org'
002 "north-east" #1: certificate verified OK: E=user-east@testing.libreswan.org,CN=east.testing.libreswan.org,OU=Test Department,O=Libreswan,L=Toronto,ST=Ontario,C=CA
003 "north-east" #1: Authenticated using RSA
002 "north-east" #1: I am sending my cert
004 "north-east" #1: STATE_AGGR_I2: sent AI2, ISAKMP SA established {auth=RSA_SIG cipher=AES_CBC_128 integ=HMAC_SHA1 group=MODP2048}
002 "north-east" #2: initiating Quick Mode RSASIG+ENCRYPT+TUNNEL+PFS+UP+AGGRESSIVE+IKEV1_ALLOW+SAREF_TRACK+IKE_FRAG_ALLOW+ESN_NO
1v1 "north-east" #2: STATE_QUICK_I1: initiate
004 "north-east" #2: STATE_QUICK_I2: sent QI2, IPsec SA established tunnel mode {ESP=>0xESPESP <0xESPESP xfrm=AES_CBC_128-HMAC_SHA1_96 NATOA=none NATD=none DPD=passive}
north #
 echo done
done
north #
 # should not match anything
north #
 grep "already in use" /tmp/pluto.log
north #
 # should only show 1 connection
north #
 ipsec whack --trafficstatus
006 #2: "north-east", type=ESP, add_time=1234567890, inBytes=0, outBytes=0, id='C=CA, ST=Ontario, L=Toronto, O=Libreswan, OU=Test Department, CN=east.testing.libreswan.org, E=user-east@testing.libreswan.org'
north #
north #
 ../bin/check-for-core.sh
north #
 if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi