/testing/guestbin/swan-prep west # ipsec start Redirecting to: [initsystem] west # /testing/pluto/bin/wait-until-pluto-started west # ipsec auto --add west-east 002 added connection description "west-east" west # ipsec whack --impair suppress-retransmits west # echo "initdone" initdone west # #!/bin/sh west # # we can transmit in the clear west # ping -q -c 8 -n 192.1.2.23 PING 192.1.2.23 (192.1.2.23) 56(84) bytes of data. --- 192.1.2.23 ping statistics --- 8 packets transmitted, 8 received, 0% packet loss, time XXXX rtt min/avg/max/mdev = 0.XXX/0.XXX/0.XXX/0.XXX ms west # # bring up the tunnel west # ipsec auto --up west-east 002 "west-east" #1: initiating Main Mode 1v1 "west-east" #1: STATE_MAIN_I1: initiate 1v1 "west-east" #1: STATE_MAIN_I2: sent MI2, expecting MR2 1v1 "west-east" #1: STATE_MAIN_I3: sent MI3, expecting MR3 002 "west-east" #1: Peer ID is ID_FQDN: '@east' 003 "west-east" #1: Authenticated using RSA 004 "west-east" #1: STATE_MAIN_I4: ISAKMP SA established {auth=RSA_SIG cipher=AES_CBC_256 integ=HMAC_SHA2_256 group=MODP2048} 002 "west-east" #2: initiating Quick Mode RSASIG+ENCRYPT+TUNNEL+PFS+UP+IKEV1_ALLOW+SAREF_TRACK+IKE_FRAG_ALLOW+ESN_NO 1v1 "west-east" #2: STATE_QUICK_I1: initiate 004 "west-east" #2: STATE_QUICK_I2: sent QI2, IPsec SA established tunnel mode {ESP=>0xESPESP <0xESPESP xfrm=AES_CBC_128-HMAC_SHA1_96 NATOA=none NATD=none DPD=active} west # # use the tunnel west # ping -q -c 8 -n 192.1.2.23 PING 192.1.2.23 (192.1.2.23) 56(84) bytes of data. --- 192.1.2.23 ping statistics --- 8 packets transmitted, 8 received, 0% packet loss, time XXXX rtt min/avg/max/mdev = 0.XXX/0.XXX/0.XXX/0.XXX ms west # # show the tunnel! west # echo "Tunnel should be up" Tunnel should be up west # ipsec whack --trafficstatus 006 #2: "west-east", type=ESP, add_time=1234567890, inBytes=672, outBytes=672, id='@east' west # # Wait more then 15 seconds while ensuring there is traffic west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # # force a rekey west # ipsec auto --up west-east 002 "west-east" #3: initiating Quick Mode RSASIG+ENCRYPT+TUNNEL+PFS+UP+IKEV1_ALLOW+SAREF_TRACK+IKE_FRAG_ALLOW+ESN_NO 1v1 "west-east" #3: STATE_QUICK_I1: initiate 004 "west-east" #3: STATE_QUICK_I2: sent QI2, IPsec SA established tunnel mode {ESP=>0xESPESP <0xESPESP xfrm=AES_CBC_128-HMAC_SHA1_96 NATOA=none NATD=none DPD=active} west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # sleep 1 west # ping -q -c 1 -n 192.1.2.23 >/dev/null west # echo done done west # # There should not be any R_U_THERE packets from either end because we are not idle west # grep R_U_THERE /tmp/pluto.log west # west # ../bin/check-for-core.sh west # if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi