/testing/guestbin/swan-prep
west #
 ipsec start
Redirecting to: [initsystem]
west #
 /testing/pluto/bin/wait-until-pluto-started
west #
 ipsec auto --add west-east
002 added connection description "west-east"
west #
 echo "initdone"
initdone
west #
 # we can transmit in the clear
west #
 ping -q -c 4 -n 192.1.2.23
PING 192.1.2.23 (192.1.2.23) 56(84) bytes of data.
--- 192.1.2.23 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time XXXX
rtt min/avg/max/mdev = 0.XXX/0.XXX/0.XXX/0.XXX ms
west #
 # bring up the tunnel
west #
 ipsec auto --up west-east
003 "west-east" #1: multiple DH groups in aggressive mode can cause interop failure
003 "west-east" #1: Deleting previous proposal in the hopes of selecting DH 2 or DH 5
002 "west-east" #1: initiating Aggressive Mode
003 "west-east" #1: multiple DH groups in aggressive mode can cause interop failure
003 "west-east" #1: Deleting previous proposal in the hopes of selecting DH 2 or DH 5
1v1 "west-east" #1: STATE_AGGR_I1: initiate
002 "west-east" #1: Peer ID is ID_FQDN: '@east'
002 "west-east" #1: Peer ID is ID_FQDN: '@east'
003 "west-east" #1: Authenticated using RSA
004 "west-east" #1: STATE_AGGR_I2: sent AI2, ISAKMP SA established {auth=RSA_SIG cipher=AES_CBC_256 integ=HMAC_SHA1 group=MODP1536}
002 "west-east" #2: initiating Quick Mode RSASIG+ENCRYPT+TUNNEL+PFS+UP+AGGRESSIVE+IKEV1_ALLOW+SAREF_TRACK+IKE_FRAG_ALLOW+ESN_NO
1v1 "west-east" #2: STATE_QUICK_I1: initiate
004 "west-east" #2: STATE_QUICK_I2: sent QI2, IPsec SA established tunnel mode {ESP=>0xESPESP <0xESPESP xfrm=AES_CBC_128-HMAC_SHA1_96 NATOA=none NATD=none DPD=active}
west #
 # use the tunnel
west #
 ping -q -c 4 -n 192.1.2.23
PING 192.1.2.23 (192.1.2.23) 56(84) bytes of data.
--- 192.1.2.23 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time XXXX
rtt min/avg/max/mdev = 0.XXX/0.XXX/0.XXX/0.XXX ms
west #
 # show the tunnel!
west #
 echo "Tunnel should be up"
Tunnel should be up
west #
 ipsec whack --trafficstatus
006 #2: "west-east", type=ESP, add_time=1234567890, inBytes=336, outBytes=336, id='@east'
west #
 # Let R_U_THERE packets flow
west #
 echo "Waiting 15 seconds..."
Waiting 15 seconds...
west #
 sleep 15
west #
 echo "Setting up block via iptables"
Setting up block via iptables
west #
 iptables -I INPUT -s 192.1.2.23/32 -d 0/0 -j DROP
west #
 iptables -I OUTPUT -d 192.1.2.23/32 -s 0/0 -j DROP
west #
west #
 # DPD should have triggered now
west #
 echo "Tunnel should be down"
Tunnel should be down
west #
 ipsec whack --trafficstatus
west #
 # Remove the Blockage
west #
 echo "Removing block"
Removing block
west #
 iptables -D INPUT -s 192.1.2.23/32 -d 0/0 -j DROP
west #
 iptables -D OUTPUT -d 192.1.2.23/32 -s 0/0 -j DROP
west #
 sleep 20
west #
 sleep 20
west #
 ping -q -c 4 -n 192.1.2.23
PING 192.1.2.23 (192.1.2.23) 56(84) bytes of data.
--- 192.1.2.23 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time XXXX
rtt min/avg/max/mdev = 0.XXX/0.XXX/0.XXX/0.XXX ms
west #
 # Tunnel should be back up now
west #
 echo "Tunnel should be up"
Tunnel should be up
west #
 ipsec whack --trafficstatus
006 #4: "west-east", type=ESP, add_time=1234567890, inBytes=336, outBytes=336, id='@east'
west #
 echo done
done
west #
 # no tunnels left, Ma!
west #
west #
 ../bin/check-for-core.sh
west #
 if [ -f /sbin/ausearch ]; then ausearch -r -m avc -ts recent ; fi